top of page

Photo Gallery & Blog

Our Blog

An ongoing series of informational entries

Braking is essential and the factory rear drum brakes on the 2005–2022 Toyota Tacoma underperform. Pedders Suspension & Brakes has the ultimate upgrade with its TrakRyder Rear Disc Brake conversion kit. This all-inclusive kit comes with the necessary hardware to convert the rear drums to discs, drastically increasing the vehicle's braking performance and stopping power. The TrakRyder rear disc brake kit improves brake pedal feel and modulation by offering a smaller pad but making the clamping force more efficient. Disc brakes also experience less brake fade after strenuous use; when compared to drum brakes because of the larger disc-to-pad surface area. Furthermore, this kit has undergone extensive testing and is ADR certified, which Pedders backs with a nationwide two-year or 24,000-mile warranty.


Increased braking performance

Easier mounting and pad removal

All hardware included

TrakRyder Kevlar ceramic brake pads

TrakRyder Geomet coated and slotted disc brake rotors

2 Year / 24000 mile nationwide warranty

Application: 2005–2022 Toyota Tacoma

Part Number:

PED-PBCK006, Pedders 05-20 Toyota Tacoma Rear Brake Conversion Kit w/ 6 Lug Rear


JUNE 17, 2022

Home charging just got more convenient using the EvoCharge charging station with EvoReel. The modern compact design houses 24 amps of power, and the EvoReel provides a simple, clean way to use and store the charger cable. EvoCharge’s standard commercial Level 2 EVSE charger offers non-networked power for virtually all-electric vehicles (EV) and Plug-in Hybrid Electric Vehicles (PHEV). With a simple interface and no activation required, the EvoCharge Level 2 commercial EV charger can be plugged into a 240v outlet or can be hardwired by a professional electrician. The standard EvoCharge EVSE commercial charging station comes non-networked with no activation required.

EvoReel cable management keeps cords off the floor and at arm’s reach, improving cleanliness, safety, and efficiency. It keeps the charging cable retracted when not in use and suspended when charging. The 22ft EvoReel with a 3ft interconnect cable is designed to be mounted near the charging station on the wall or on an EvoCharge pedestal, providing convenient access. The reel is spring-loaded to auto retract and can be locked in position while charging the vehicle.


Modern compact design and form factor with robust construction for maximum durability

Safety rated UL/cUL listed

Cable management for safe, clean environment

NEMA 4 rated for indoor or outdoor use

SAE J1772, 208-240VAC, 7.2-7.7kW for faster charging

Driver gets back on the road with 8x faster charging than standard Level 1 chargers

Easy installation and ready to charge EV

Adjustable max output amperage 32A, 24A, 16A

Part Number:

EVC4AA0C2B1A1, EvoCharge EVSE with 22ft EvoReel

Test results on aFe's Dynojet dyno showed this product will increase the Mustang's power by a dyno-proven 17 HP and 15 lb-ft Torque @ 6,000 rpm with this simple-to-install device. Testing was conducted on a 2020 Mustang 5.0 comparing stock and the aFe Power Billet Throttle Body (all tests conducted using 91-octane fuel). No other modifications to the vehicle were made, so imagine the potential when adding in other performance-enhancing products such as a cold air intake, tuner, and cat-back exhaust! For truck enthusiasts, this product also fits the F-Series. Not only did aFe Power increase the bore diameter from the stock 80 mm to 85 mm, but they also redesigned the throttle body from the ground up, aerodynamically improving the airflow path. Why 85 mm and not larger? 3 Reasons: 1) At 85 mm, no custom tuning is required so this works right out of the box; 2) The 85 mm diameter provides a direct path into the 84 mm intake manifold opening, a larger diameter would require modification to the stock manifold or use of an aftermarket one, and 3) The mounting diameter for the intake tube is only slightly increased, but it allows drivers to retain the stock intake tube or upgrade to a cold air intake without having any special adapters.


85mm bore diameter, no tuning required

Aerodynamically designed flow path, dyno-proven HP and TQ gains

Retains OEM electronics and gearing mechanism, no rough idling, no CEL

Billet aluminum, precision machined, black anodized finish

Furnished complete, all hardware included, Simple installation

Application: 2018–2021 Mustang GT, 2018–2020 F-150, 2020–2022 F-250/F-350

Part Number:

46-39101, aFe 18-21 Ford Mustang GT 5.0L 85mm Billet Throttle Body


MAY 29, 2022

Kraftwerks supercharger systems for the Ford Mustang GT are proven to make horsepower while maintaining reliability. This kit is built to fit the 2018 to 2021 model years. In-house dyno tests have verified gains of 150+ wheel horsepower and 115+ pound-feet of torque on a stock Mustang. This translates to over 500 rear-wheel horsepower! More power can be made with more aggressive aftermarket headers, exhaust, and tuning thanks to the highly capable C38-92 supercharger unit.

The unique frictional planetary-drive supercharger unit is the heart of each Kraftwerks supercharger system. This centrifugal unit delivers boost efficiently with zero boost lag or spiking which is common in other forms of forced induction. The unit's efficient design ensures low operating temperatures, resulting in a cooler, denser air charge and lower intake air temperatures. To ensure things stay cool and lubricated, the supercharger contains an internal pump for circulating supercharger oil through its own separated system. The included supercharger oil cooler keeps operating temperatures low even in the roughest environments. Optimal air/fuel ratio is ensured with Grams Performance OEM-fit 52lb/hr fuel injectors that are plug-and-play thanks to the included electrical plug adapters. Tuning is required for proper operation of the system and can be acquired separately. Each Mustang supercharger kit includes all necessary components for proper, 100% bolt-on installation that can be performed with basic tools. No metal cutting, drilling, or welding is necessary. CNC machined, powder-coated mounting brackets securely mount the supercharger and divorced-belt drive components to the engine. All necessary aluminum tubing, couplers, and clamps are included and routed through factory access holes to the front bumper-mounted 24-inch intercooler. The included high-flowing air filter ensures optimal CFM to support the supercharger unit's needs. From idle to redline, this Kraftwerks kit packs more, reliable gallop into the Mustang with less strain on engine and drivetrain components.


Instant Boost, Zero Lag

C38-92 Supercharger Head Unit

Self-Contained Supercharger Oiling/Cooling System (No need to tap into existing Engine Oil Supply)

Comprehensive Design and Instructions (Designed to be done at home with capable technical skills)

Grams Performance 550cc/min. High Impedance Fuel Injectors w/ Plug-and-Play Connectors

Front Mount Intercooler (24 x 8 x 3.5 inch)

Aluminum Intercooler Charge Piping (rust/corrosion free)

High-Quality CNC-Machined Brackets and Pulleys

High-Quality Fasteners and Hardware

Colder Air Intake Temperatures compared to other Boosted Applications

Large-Port Bypass Valve recirculates air for efficiency

Application: 2018–2021 Ford Mustang GT

Part Number:

150-04-1800, KraftWerks 18-21 Ford Mustang 5.0L V8 Race Supercharger Kit (C38-92)


MAY 25, 2022

Soul Performance Products based its McLaren downpipes around 3.5″ piping for the best possible sound and support for increased horsepower. If drivers plan on tuning the vehicle or running upgrade turbos, Soul Performance Products downpipes are designed to support anything that can be thrown at them. Soul Performance Products made the conscious decision to retain the factory McLaren heat shields for their proven effectiveness and a clean, factory-like installation and finish. Incorporating HJS HD 200 cell catalytic converters to withstand extreme abuse – lets drivers hear the turbos clear as day with no check engine lights or noxious fumes. Drivers will be able to enjoy the cabin presence and beautiful engine note from the 3.8L power plant with no droning in the cabin, only an intoxicating mechanical chorus.

Soul Performance Products uses the highest quality catalytic converters available, known for their industry-leading flow and durability. With HJS's premium wash coat full of precious metals, they are efficient enough at catalyzing to meet strict EURO 4 emission standards while still allowing for an increase in flow – all without a check engine light. The HD design uses a stout triple foil winding for maximum strength. The brazing stripe is an extra feature in the interest of durability where it prevents the core from moving or experiencing any damage from sustained high horsepower abuse. Soul Performance Products use a large and appropriately sized catalyst to allow maximum power gains – the same cats tested and proven on our McLaren and Porsche Turbo applications for big horsepower support.


Fits all McLaren 570S/GT

3.5″ piping is larger than competition for a greater exhaust note

Retains use of factory McLaren-engineered heat shielding

HJS HD 200 cell catalytic converters prevent check engine lights and fumes

Application: 2015+ McLaren 570S/GT

Part Number:

MCL.570.SCC, SOUL 2015+ McLaren 570S/GT/540C 3.5in Sport Downpipes (w/ 200 Cell Cats)


MAY 25, 2022

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. These 8” tall 360-degree radial flow air filters feature a 3" flange and aFe Power's oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. The progressive layering of the filter provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use where the expanded metal provides additional impact protection. These one-piece sealed housings, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, feature aFe Power's patent-pending filter-to-housing interface. Their innovative design minimizes the total number of parts, making for an easy installation. Two clear sight windows allow for hassle-free filter inspection, without having to disassemble the whole system. The Momentum system features high-quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable. This kit includes high-quality premium clamps and silicone bellow couplings are used for durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.


Washable and reusable air filters for maximum performance

Innovative filter-to-housing interface for easy installation

Large clear sight windows for convenient filter inspection without disassembly

Application: 2022+ Toyota Tundra

Part Number:

50-70100D, aFe 2022 Toyota Tundra V6-3.5L (tt) Momentum GT Cold Air Intake System w/ Pro DRY S Filter

50-70100R, aFe 2022 Toyota Tundra V6-3.5L (tt) Momentum GT Cold Air Intake System w/ Pro DRY S Filter

Brief overview:

Proudly engineered, designed, and manufactured in-house at AWE, in the USA

Deep, aggressive BOXER® tone

Available as Touring or Track Edition Catback Exhausts

Touring Edition features AWE’s patented drone-canceling solution, 180 Technology®, tuned specifically for the FA24

5” double-walled, slash-cut available in chrome silver or diamond black

Handcrafted from 3” & 2.5” CNC mandrel-bent, U.S.-sourced .065” wall T304L stainless steel

Direct bolt-on for factory-like simplicity

Conversion Kits available - easily switch between editions

Less is more: clean, straight-through design maximizes flow

Perfect fitment, guaranteed

AWE No Check Engine Light Guarantee

Lifetime warranty


MAY 15, 2022

MagnaFlow Exhaust has developed two brand new special series Cat-Back Systems specifically for the 2022 Nissan Frontier. The Street Series Cat-Back Performance Exhaust System was designed with a deep, resonant tone through 3" main piping. This piping passes through a straight-through muffler and exits in a single 4" polished tip for a unique and sporty look. An integrated NDT (No Drone Technology) resonator and versatile tuning of the piping and straight-through muffler ensure that this exhaust system nullifies the unwanted droning noises that can otherwise occur at freeway speeds while maintaining moderate exterior and mild interior sound levels. This system features dyno-proven performance gains and is produced with durable, corrosion-resistant stainless steel.

Additionally, MagnaFlow is offering their Overland Series Cat-back Performance Exhaust system that is perfect for ultimate off-roading builds. With 2.5" main piping that closely hugs the undercarriage of the 2022+ Nissan Frontier and high clearance, 2.5" single side exit, this kit simultaneously improves both ground clearance and departure angles. This system features a balanced approach to sound levels, allowing the enjoyment of the MagnaFlow signature sound while maintaining situational awareness out on any adventure. As with the Street Series Cat-Back, this system features dyno-proven performance gains and is produced with durable, corrosion-resistant stainless steel.

Application: 2022 Nissan Frontier

Part Numbers:

19574, Magnaflow 2022+ Nissan Frontier (3.8L V6) Street Series Cat-Back Performance Exhaust System

19599, Magnaflow 2022+ Nissan Frontier (3.8L V6) Overland Series Cat-Back Performance Exhaust System


MAY 15, 2022

DeatschWerks has taken its DW400 electric fuel pump and turned it into an in-tank drop-in module. These modules feature a fuel pump that flows 415lph and uses an impeller made of a lightweight composite that's impervious to fuels like E85 and race fuel. DeatschWerks DW400 in-tank electric fuel pump modules are designed for a -6AN feed line and utilization of the OE return line. They retain all of the OE module functionality including a plug-and-play harness connector, fuel level sender, and dual surge bucket.

Application: 2006–2011 Honda Civic Si

Part Number:

9-401-7041, DeatschWerks 06-11 Honda Civic Si K20 DW400 Pump Module


MAY 8, 2022

EnduraPro Plus are high-performance OE-shape shock absorbers. Designed to use with the vehicle's original (OE) spring and the upper mount, their lower spring seat is shaped identical to the OE shock absorber. In addition to replacing worn or leaking OE dampers, these products are excellent to improve specs like ride quality or handling without changing your ride height. Drivers can also use them with Tein lowering springs. The Tein EnduraPro Plus shock absorber is made with a Hydraulic Bump Stopper (H.B.S) that provides increased comfort and height durability at maximum passenger or cargo load. When regular shock absorbers fully stroke, their bump rubbers are compressed. When the energy that is generated by this compression is released it can disturb the vehicle's behavior. Furthermore, repeated full strokes can damage the damper. In the same situation EnduraPro, featuring H.B.S., internally converts the impact of the stroke to thermal energy (heat) and absorbs it, strongly reducing the impact that disturbs the vehicle's behavior. With less damage to the dampers, H.B.S. also contributes to their durability. In shock absorbers with inactive or no H.B.S., the operative valve (green) floats, and oil flows freely through the base valve ports. Resistance to the flow from the shim stack then causes damping force. Near full compression, when the piston rod strokes beyond a predetermined point, the operative valve is pushed down and activates H.B.S.: the base valve ports are narrowed, blocking the oil flow. This results in a high damping force. A relief valve serves to suppress sudden damping force increase when the pressure in the cylinder exceeds its regular level. The setup of the H.B.S. mechanism is optimized per vehicle model, with the right activation point and damping force.


OEM shaped shock absorbers

16-level dampening adjustability

High-performance oil with increased capacity over OEM

Hydraulic Bump Stopper (H.B.S.)

Optimized valving for improved performance and comfort

Application: 2017+ Tesla Model 3

Part Number:

VSGP2-B1MS2-L, Tein 2017+ Tesla Model 3 Long Range 2WD EnduraPro Plus Shock - Front Left

VSGP2-B1MS2-R, Tein 2017+ Tesla Model 3 Long Range 2WD EnduraPro Plus Shock - Front Right

VSGP3-B1MS2, Tein 2017+ Tesla Model 3 Long Range EnduraPro Plus Shock - Rear

VSGP4-B1MS2-L, Tein 2017+ Tesla Model Performance AWD EnduraPro Plus Shock - Front Left

VSGP4-B1MS2-R, Tein 2017+ Tesla Model 3 Performance AWD EnduraPro Plus Shock - Front Right


MAY 6, 2022

GrimmSpeed has set the standard not only for creating high quality performance upgrades, but also aesthetic parts. Now Grimmspeed is proud to introduce the go-to fender flare kit for the 2018+ Crosstrek from TRAILS by GrimmSpeed. These kits include everything needed to take a Crosstrek from looking like every other grocery-getter on the road to something that could be found at the end of a rocky ascent. Coupled with the TbG Lift Kits, this is the look that these cars should have come with from the factory. Each flare extends the width of the vehicle's body by 2" (50mm), allowing a lower offset rim with a more aggressive tire to be run.


OEM-Quality Textured Plastic Material

Made in the USA

Each flare adds 2" (50mm) of width

Custom TRAILS by GrimmSpeed Logo Badges for each piece

Direct-fit for smooth install with only minor trim modification

Application: 2018+ Subaru Crosstrek

Part Number:

TBG114036, GrimmSpeed 2018+ Subaru Crosstrek TRAILS Fender Flare Kit


MAY 11, 2022

Torque Solution mounts are made of high-quality billet aluminum material machined to precise tolerances. The heart of the mounts are made of high-grade polyurethane material. These combinations of materials and measurements allow for unmatched performance and reliability. This mount kit is designed for both street and race applications.


- Eliminates wheel hop/traction loss

- Improved 60fts / e.t's

- CNC billet aluminum

- Black anodized w/ Torque Solution logo

- Steel black powder-coated mount brackets

- 75A durometer urethane bushings

Application: 2016–2018 Ford Focus RS, 2013–2020 Ford Focus ST

Part Number:

TS-ST-EMK, Torque Solution Complete Engine Mount Kit: Ford Focus ST 2013+ / RS 2016+


MAY 11, 2022

It was 2001, and AEM was on the verge of releasing their first standalone racing ECU, the Series 1. Product Development Director John Romero, foreseeing the increased demand for tuning resources, knew that AEM had to develop a more affordable wideband to meet the needs of the larger grassroots racing community. It was common to see a Horiba or MoTec Lambda meter installed next to a dyno, and it was unheard of to see a wideband installed in a vehicle. These systems cost thousands of dollars each. The engineers at AEM then went to work looking to produce a gauge interface for the controller so that tuners could see AFR changes in real-time. A simple 'what if' question led to creating an entirely new product segment.

In early 2002, AEM Performance Electronics had just released compact single and dual-channel Wideband AFR controllers which connected to ECUs via analog or serial. Still, most ECUs had limited logging capabilities, and internal logging playback features were uncommon. Moreover, while narrowband gauges existed, they were not very useful. As a result, no company focusing on wideband controllers had ever considered making one into a gauge. Nevertheless, an opportunity existed, and AEM Performance Electronics seized it.

The Birth Of The 30-4100

Though AEM Performance Electronics didn't make gauges at the time, it was the wideband gauge that launched the supporting gauge line. With the heavy lifting on the controller development finished, the remaining challenge was packaging this technology into a gauge. This effort culminated in creating the 30-4100, AEM's original Classic Digital Wideband UEGO (Universal Exhaust Gas Oxygen) air/fuel ratio Controller Gauge. Priced at roughly a tenth of the systems that live next to dynos, the 4100 was a game-changer because it allowed racers to monitor AFRs without downloading log files. Having an onboard controller also allowed racers to review log files after their sessions or passes at the track and make adjustments with confidence, knowing that they were running a safe air/fuel ratio.

Innovations In Lambda Control

As competition grew, AEM continuously improved its 30-4100 gauge-type wideband controller for enhanced response and reliability, ultimately superseding this part number to 30-4110. But with over a decade of changes to the original design and the advent of improved processing capabilities, it was time to innovate. Enter the X-Series Wideband Gauge.

Built on entirely new architecture with patented X-Digital technology, AEM sought to create the fastest-responding wideband on the market. But why does response time matter?

Speed = Accuracy

Think of it this way; exhaust gases have to pass the sensor, then the sensor has to evaluate the gas mixture and send a value to the controller, which reports the value. There is an inherent dead time associated with this, so the faster you can get the controller to respond to the sensor and report the value, the closer those lean and rich spikes are reported in relation to their actual occurrence, which means that you can "see" them and tune for them. If you are interested in learning more about response time, each gauge's features, install tips, and performance testing, AEM has a great video demonstration here.

In independent tests against 17 competitor widebands, AEM's X-Series inline and Gauge-Type wideband controllers were the fastest. Because they are so fast, they can catch changes in AFRs that other controllers may miss, which allows tuners to use this data to dial in the best possible tune, especially during transitional throttle events. But, of course, any racer knows that these minor adjustments can mean tenths of seconds gained on the track.

Who Can Use Wideband Data?

Knowing the AFRs proves to be beneficial to racers but is also very helpful for street cars looking to get the most performance out of the engine. With today's modern engines and all of the corrections that an OE ECU has to make to keep air/fuel ratios in step with AFR targets, skewing toward stoichiometry. Although an engine may 'feel' OK, how do you know if it's hitting targets or running lean? Even in a modern car, a failing fuel pump, blocked filter, higher than advertised ethanol content in fuel, and clogged injectors can affect fuel trims, and the only way to know this is with an AFR gauge.


APRIL 21, 2022

AMS Performance's VW Golf R Carbon Fiber Cold-Air Intake upgrade was designed to draw a higher volume of cold air into the stock turbocharger. With this intake installed, bulky air filter boxes are replaced with the company's carbon fiber tubing and dry media filter. This eliminates clutter within the engine bay while drawing cold air from outside. The MK7 Golf R Cold-Air Intake Kit is a vast improvement over the stock intake system and supports power levels up to 600 horsepower.


Draws a higher volume of cold air

Eliminates unsightly engine bay clutter

Effective to over 600 horsepower

No yellowing or fading over time

Even distribution of cold-air across the filter

Dry media filter

Application: 2015+ Volkswagen Golf R

Part Number:

AMS.21.08.0001-1, AMS Performance 2015+ VW Golf R MK7 Carbon Fiber Intake


APRIL 21, 2022

McLeod Racing recommends the tuner series clutch kit to be used with builds that feature 20-25% more power, or cars with mild bolt-ons that see mostly street use. Each kit features a high quality matched pressure plate and an advanced steel backed disc for smooth and even engagement. These clutch kits also feature a pilot tool and throw out bearing where applicable. This is the perfect replacement for the factory hardware.


APRIL 19, 2022

Akrapovič has released its Porsche 911 GT3 (992) Slip-On Race Line (Titanium) exhaust system and rear carbon fiber diffusers! These products can be found at NWcarpart , the Sole U.S. Automotive Distributor for Akrapovič.

This exhaust has been designed to deliver performance, exhilarating sound, and driving enjoyment with no compromise on comfort. Akrapovič’s Slip-On Race Line represents the first step in improving the exhaust system performance and is easily installed onto the Porsche GT3’s stock system. Built from high-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter and gives the car that unique and sporty Akrapovič sound. The system delivers a power increase of 8.7 hp at 2,900 rpm and a torque gain of 17.8 lb-ft at 2,400 RPM with precise throttle response. The Slip-On Race Line provides a 20.7% reduction in weight when compared to the stock exhaust system.

Optional offerings include a stunning carbon-fiber diffuser with the choice of a high-gloss or matte finish. The diffuser is a completely new design compared to the factory diffuser, and it gives the rear of the latest GT3 a more aggressive presence. This diffuser displays the tailpipes to their full extent while giving an extra racing look with new, carefully designed titanium inserts.

Note: The system connects to the stock components using the mandatory Slip-On Race Line Adapter (SS), which must be ordered separately. Drivers aiming to install Akrapovič complete Evolution exhaust system, the Evolution system (Titanium) E-PO/T/7 must be ordered separately.

Application: 2021–2022 Porsche 911 GT3 (992)

Part Number:

S-PO/TI/23, Akrapovic 21-22 Porsche 911 GT3 (992) Slip-On Race Line (Titanium) w/Titanium Tips

P-CP034, Akrapovic 21-22 Porsche 911 GT3 (992) Slip-On Race Line Adapter Set (Titanium)

E-PO/T/7, Akrapovic 21-22 Porsche 911 GT3 (992) Evolution Race System

DI-PO/CA/9/M, Akrapovic 21-22 Porsche 911 GT3 (992) Rear Carbon Fiber Diffuser - Matte

DI-PO/CA/9/G, Akrapovic 21-22 Porsche 911 GT3 (992) Rear Carbon Fiber Diffuser - High Gloss


APRIL 19, 2022

The Wagner Tuning Audi RS 6 (C8) Intercooler Kit provides 41% more volume compared to the stock-mounted intercooler. Wagner Tuning's engineers have increased the intercooler core size and efficiency, as well as improved the end tank design to remove any OEM bottlenecks, resulting in increased flow rating and charge cooling properties. This intercooler kit uses a newly developed Wagner Tuning Competition Intercooler Core which is made specifically for this application. It is one of the highest quality Tube Fin cores available on the market. Each intercooler has just a weight of 6.5kg. Flow analyses and simulations were created to optimize the design for the best possible Internal Airflow. The Intercooler Kit also includes 2 suitable carbon air shrouds to ensure optimum airflow to the intercooler. This intercooler kit is the best choice when it comes to performance gains and low intake temperatures. Anti Corrosion protective Coating with perfect thermal heat dissipating character. Optimal cooling with clearly more power. This kit is ready for installation. Fitment is easy, replacing the OEM intercooler. All of Wagner Tuning's products undergo rigorous quality control and are also tested by compressive strength of up to 6 bar. This intercooler kit is suitable for racing.

Application: 2021+ Audi RS 6 (C8)

Part Number:

200001180, Wagner Tuning Audi RS 6 C8 Competition Intercooler Kit


APRIL 13, 2022

Cooling efficiency and quality should never be compromised. AMS Performance ensures that does not happen with their new Intercooler System for 2013–2015 Porsche 911 Turbo/Turbo S (991.1). This system utilizes a pair of 5” thick, high volume cores to deliver the most power producing upgrade on the market. Each huge 13.1”x5”x8.7” Garrett core provides optimum fin density of 18 fins per inch and 9.25mm fin height for unmatched cooling. AMS Performance developed the end tanks through CAD to provide extremely smooth features and geometry, ultimately delivering the best flow and maximum horsepower.

The AMS Performance 991.1 Intercooler System retains full use of the stock intercooler inlets (located in front of each rear wheel) forcing cool air into our larger, carbon fiber shrouds. Not only is this option more aesthetically pleasing, but each rigid, OEM-quality carbon fiber piece is made to seamlessly mate to that AMS Performance Intercoolers feeding them cooler ambient air more efficiently than the other alternatives.


CAD design achieves perfect fitment and provides the most potential for power

Billet turbo outlet adaptors

Carbon fiber intercooler shrouds form a tight seal to maximize cooling efficiency

Smooth cast end tank design to reduce turbulence

Optimum fin density for improved cooling

Application: 2013–2015 Porsche 911 Turbo/Turbo S (991.1)

Part Number:

ALP.23.09.0001-1, AMS Performance 13-15 Porsche 911 Turbo/Turbo S (991.1) Alpha Intercooler Kit w/Carbon Fiber Shrouds


APRIL 13, 2022

Synergy MFG's Jeep JL / JLU / JT Front Track Bar and Sector Shaft Brace is designed to better distribute the increased load the frame side track bar bracket encounters on a lifted Jeep and supports the steering box sector shaft from excessive deflection. A track bar bracket or steering box failure is a quick way to end the day. A lift and large tires can easily push these components past their capacity. Without the Front Track Bar and Sector Shaft Brace, excessive deflection of the steering box sector shaft can occur which can result in excessive steering box wear, play, or breakage.


Better distributes the increased load on the factory track bar bracket

Added thickness at the track bar bolt prevents the track bar bolt from ovalizing out the stock mount.

Bolt-on fix for those who already have an ovalized track bar bracket bolt hole.

Zerk fitting for easy greasing.

Track bar brace laser cut and CNC formed from 3/16 inch high strength steel.

Sector shaft brace CNC machined from 6061-T6 Aluminum with a press-fit oilite bronze bushing.

Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance.

Application: 2018+ Jeep Wrangler JL / JLU, 2020+ Jeep Gladiator JT

Part Number:

8869-01, Synergy 2018+ Jeep Wrangler/Gladiator Front Track Bar and Sector Shaft Brace


APRIL 14, 2022

Honda Civic LX, EX, and EX-L hatchback owners seeking the best of the best can now turn to Rally Armor UR mud flaps for their FK7 gen Honda Civics. Fabricated from pliant yet ultra hardy polyurethane, Rally Armor's material stands up to high heat as well as sub-zero temperatures. Manufactured to retain elastic qualities through extreme weather changes, Rally Armor mud flaps yield to curbs and steep inclines unlike alternative look-alike aftermarket flaps which stiffen up, scrape, bump and bruise against run-of-the-mill road conditions.


Four polyurethane mud flaps

Includes all required hardware

Custom stainless-steel brackets

Application: 2017–2020 Honda Civic LX/EX/EX-L Hatchback

Part Number:

MF71-UR-BLK/BL, Rally Armor 2017-2020 Honda Civic LX / EX / EX-L Hatchback Black Mud Flap Blue Logo

MF71-UR-BLK/DGRY, Rally Armor 2017-2020 Honda Civic LX / EX / EX-L Hatchback Black Mud Flap Dark Grey Logo

MF71-UR-BLK/RD, Rally Armor 2017-2020 Honda Civic LX / EX / EX-L Hatchback Black Mud Flap Red Logo

MF71-UR-BLK/WH,Rally Armor 2017-2020 Honda Civic LX / EX / EX-L Hatchback Black Mud Flap White Logo

MF71-UR-RD/WH, Rally Armor 2017-2020 Honda Civic LX / EX / EX-L Hatchback Red Mud Flap 


APRIL 14, 2022

Form and function converge together in the Eventuri Carbon Intake Plenum for the 2008–2013 BMW M3 (E9X). Made from 100% high grade prepreg carbon including the internal trumpets, this plenum replaces the stock plastic version and unleashes the roar of the naturally aspirated BMW V8 engine. Since the trumpet lengths are tuned by BMW to the internal volume, changing this could result in a loss of performance so these were kept the same volume to not upset the way the car drives in terms of power delivery. This plenum can be used with the OEM airbox or any aftermarket intake system.

Application: 2008–2013 BMW M3 (E9X)

Part Number:

EVE-E9X-CF-PLM, Eventuri BMW E9X M3 - Complete Black Carbon Inlet Plenum - No Emblem


APRIL 15, 2022

Take the 2019+ Toyota 4Runner TRD Pro to the next level with Eibach PRO-LIFT-KIT Springs! These springs are designed to provide a suspension lift on the FOX-equipped 4Runner TRD Pro while retaining the factory look and feel. Rigorous development and testing have resulted in a lift spring system that perfectly accommodates the factory FOX shocks in the TRD Pro. By optimizing height and rate within the limit of each shocks’ bypass zone, factory ride characteristics are retained and enough lift to tackle the most challenging terrain. The PRO-LIFT-KIT Springs have been subjected to hundreds of hours and thousands of cycles in development tests, all proudly made by Eibach in the USA.


Ride Height Increase

Front: +1.4"

Rear: +1.0"

Manufactured using championship-winning race spring technology

Developed to provide balanced ride quality, control, and off-road capability

Finished in heavy-duty corrosion-resistant red coating

Compatible with factory FOX shocks

Application: 2019+ Toyota 4Runner TRD Pro

Part Numbers:

E30-82-071-03-20, Eibach Pro-Truck Lift Kit for 2019+ Toyota 4Runner TRD Pro 4WD - Front

E30-82-071-03-02, Eibach Pro-Truck Lift Kit for 2019+ Toyota 4Runner TRD Pro 4WD - Rear

E30-82-071-03-22, Eibach Pro-Truck Lift Kit for 2019+ Toyota 4Runner TRD Pro 4WD - Front & Rear


APRIL 15, 2022

Now available at NWcarpart is AEM Induction Systems's Cold Air Intake for the 2007–2008 Nissan 350Z. The AEM Performance Cold Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filters and air intake housings. This air intake system was designed, tuned and dyno-tested to fit specific Nissan 350Z models. Air enters the system through dual oversized AEM Dryflow synthetic washable air filters for outstanding air flow, filtration and performance. The air filters are located in the original air box spaces and are protected by heat shields which are designed to reduce intake air temperature and increase horsepower. The intake tubes are constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensors and crankcase vent tube. The dual tapered cylinder shaped AEM Dryflow air filters are made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions).


Increased horsepower

Tuned and dyno-tested to improve acceleration and engine sound

Low restriction aluminum tubing

Easy to install using commonly available tools

Air filters last up to 100,000 miles before cleaning is required (depending on driving conditions)

Applications: 2007–2008 Nissan 350Z

Part Numbers:

21-677C, AEM 07 350z Silver Dual Inlet Cold Air Intakes w/ Heat Shields

21-677P, AEM 07 350z Polished Dual Inlet Cold Air Intakes w/ Heat Shields


APRIL 9, 2022

To maximize the engine potential, HKS suppresses the intake temperature rise as much as possible. Utilizing carbon as piping material instead of usually used aluminum helps to delay a heat transfer.


Dry carbon intake pipe uses 3K Weave Prepreg and its looks help to show racing nature of the material

Airflow resistance is also reduced by replacing the stock flexible pipe with a carbon piping

By replacing the intake pipe from conventional aluminum to carbon fiber, weight is reduced by about 35%

It is possible to reduce the weight by about 1kg with just replacing from stock intake system to HKS Racing Suction

The special attachment designed exclusively for stock intake shape

Application: 2020+ Toyota GR Supra

Part Number:

70028-AT001, HKS DryCarbon Full Cold Air Intake Kit GR SUPRA


APRIL 10, 2022

Take any Ford Modular 4.6L/5.4L V8 to the next level with COMP Cams' 234/254 Hydraulic Roller Camshaft Set. Designed to bring out the most of these engines, this camshaft set is mainly intended for big power and features a very rough idle. This set is compatible with stock valve springs and sees the best power delivery above 4900RPM. Additionally, this set requires cam phaser upgrades and custom tuning. COMP Cams recommends upgraded converter and gears to unlock the full potential of these cams.

Application: Ford 4.6L/5.4L Modular Applications

Part Number:

127020, COMP Cams Camshaft Set F4.6 3V Mod. MT2


APRIL 10, 2022

The BMC Filters panel air filter is commonly referred to as a replacement air filter. It is installed in the vehicle's original airbox to replace the OEM air filter. It is made of highly performing materials that allow an increased air flow combined with more efficient filtration, guaranteeing containment of all impurities from as small as 7 microns (compared to OEM's 10 microns).

BMC Filters are produced using a Full Molding System that enables the characteristic red filter to be realized from a single mold with no welded joints, thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable, and has optimum adhesion characteristics to all shapes of airboxes. BMC Filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity. All BMC Filters air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.

Application: 2020+ Toyota GR Supra

Part Number:

FB01054, BMC 19+ Toyota Supra GR 3.0 / BMW 330i Replacement Panel Air Filter


APRIL 11, 2022

There are no factory adjustment points for rear camber on the 2013–2021 Subaru BRZ platform, but Whiteline has the ideal solution with their Rear Lower Control Arm set. These control arms feature a specially bonded design for optimized strength typically required in high load bearing applications. Whiteline specifically engineered these arms to optimize camber alignment and compensate for body roll, body distortion and tire roll when cornering. Additionally, these arms feature protective powder coating to ensure that they are as durable as they are functional.

Applications: 2013–2021 Subaru BRZ, 2013–2016 Scion FRS, 2017–2021 Toyota 86

Part Number:

KTA216A, Whiteline 13+ Scion FRS/Subaru BRZ / 15+ WRX/STI Adjustable Rear Lower Control Arms (Pair)


APRIL 11, 2022

When lowering the 2015–2022 Ford Mustang S550 from factory settings, often the result is excessive negative camber in the rear that cannot be adjusted with factory components. Pedders Suspension & Brakes has the perfect solution with their Rear Adjustable Upper Control Arms. These control arms are precision engineered to enhance road handling, steering, and performance without compromising ride quality. This pair is a direct replacement for the OE upper rear control arms that are essential for correcting excessive negative camber on any lowered S550 Mustang. Whether it is a hard core track project or an easy going street cruiser, these control arms are a must have suspension component for the Ford Mustang.


Adjustable to correct camber

High quality, direct upgrade replacement for original parts

Heavy duty construction for enhanced durability

Part Number:

PED-5115K, Pedders 15-22 Ford Mustang S550 Rear Upper Control Arms


APRIL 12, 2022

Cruise the highway or hit the track with an MBRP Street Profile exhaust. It’s the perfect mix of aggressive sound when getting into the throttle without being obnoxious on long drives. The MBRP Active exhaust makes an incredible difference in both design and sound. This system also features quad carbon fiber shell, stainless steel exhaust tips to finish off the look.


T304 stainless steel piping

Minimize exhaust temperatures

Retains OEM active exhaust functions using the OEM actuator

High flow dual mufflers; +35% increase in flow

Internal Helmholtz Resonator design to reduce drone

Straight-through muffler design in track mode

Application: 2015–2020 Audi S3

Part Number:

S46043CF, MBRP 15-20 Audi S3 T304 Stainless Steel Cat - Active


APRIL 12, 2022

Own the night with RIGID's complete Roof Line LED light kit for the 2021+ Ford Bronco, now available at NWcarpart! This RIGID Roof Line light kit is designed specifically for the Ford Bronco and allows for a clean install of RIGID's high output LED lighting. This Roof Line light kit includes two roof line bar brackets, isolation bases, stud covers, a 40 Inch SR-Series Spot/Flood Combo light bar, solid black light covers, and a wiring harness. RIGID LED Light bars take capability to the next level with durable construction and high quality materials. Get the most out of the Ford Bronco with this LED Light kit!


Stainless Steel Construction

Complete Roof Line LED Light Mount Kit

UV and Abrasion Resistant Powder Coat

Integrated Thermal Management System

Over/Under Voltage Protection

Reverse Polarity Protection9-36 VDC Operation

50,000 Hr+ LED Lifespan

Application: 2021+ Ford Bronco

Part Number:

46724, Rigid Industries 2021 Ford Bronco Roof Line Light Kit (Incl. SR spot/flood Combo Bar)


APRIL 4, 2022

The Kraftwerks 2010–2015 Camaro SS supercharger system provides instant throttle response and a progressive power curve that increases all the way to redline without the typical spiking or surging turbochargers are known for. This unique, more useable power curve results in reduced cylinder pressures, less strain on engine components, and increased reliability. Rotrex superchargers also operate much cooler when compared to turbochargers and other supercharger systems, which reduces the engine’s intake air temperature as well as its risk of detonation. The heart of the system is the Rotrex C38-91, the largest supercharger offered from Kraftwerks, capable of supporting 700 horsepower.

Each Camaro SS supercharger system is a comprehensive design and includes all necessary components to ensure safe, reliable operation. Standard-issue with each kit is a large, front-mount intercooler (3-inch inlet and outlet - 24x12x4-inch thick) to help ensure low intake air temperatures for optimal performance. All necessary aluminum tubing, silicone couplers, and clamps are also included for easy installation. Proper air/fuel ratios are ensured with the included Grams Performance 52 lb/hr fuel injectors, and an optional engine management system. Convenient, plug-and-play fuel injector adapters are also included, making each kit a true bolt-on experience.

Rotrex superchargers are renowned for their compact size, high adiabatic efficiency, low vibration, and quiet operation. Their unique traction drive technology is what makes all of this possible, which, unlike other superchargers, transmits power through frictional forces between its rolling elements. Each Rotrex unit features its own self-contained oiling system that remains independent of the engine. Its dual-action oil pump supplies traction fluid to the supercharger while the supplied cooler ensures proper fluid temperatures at all times.


Retain factory A/C and accessories

Rotrex C38-91 Supercharger w/ 85mm Pulley (7 psi)

Aluminum intercooler piping

Oil cooler

High-quality CNC-machined brackets and idler pulley

High-quality fasteners and hardware

Recirculating bypass valve

Application: 2010–2015 Chevrolet Camaro LS3

Part Number:

150-02-1013, KraftWerks 10-15 Chevy Camaro LS3 Supercharger System w/o Tuning


MARCH 31, 2022

Now available at NWcarpart  is the ROUSH Performance Air Induction System for the 2021 Ford Bronco fits all trim levels and chassis configurations (2-door or 4-door). Combining their knowledge from off-road racing and utilizing their engineering capabilities, they have created an air induction system that increases the air filter’s surface area without modifying the engine compartment.

The Air Induction System is made from durable injection-molded plastic with an easy-to-clean texture that matches the underhood panels for an OE look. A see-thru window allows the ability to monitor the air filter when out on the trails without having to remove components, keeping the adventure rolling on!

Each ROUSH Performance Bronco Air Induction System includes a pre-filter that is designed to repel water and keep out larger debris to help keep the filter clean to breathe while still allowing the air to get through. The pre-filter simply slides over the intake like a sleeve and features the ROUSH “R” Logo. It is recommended periodically removing the pre-filter and cleaning it to prevent debris build up that will maximize the filter's lifespan.


Fits all 2.3L and 2.7L 2021 Ford Bronco

30% more filtration area than OE filter

Maintains factory water fording capability (prevents water ingestion into the engine)

Increased air intake sound

See-thru lid to monitor filter capacity

Application: 2021+ Ford Bronco

Part Number:

422233, ROUSH 2021+ Ford Bronco Cold-Air Induction System


MARCH 19, 2022

Nitrous Express has combined performance, quality, and easy installation in this new nitrous system engineered specifically for Nissans and Infinitis. This system includes an Autolearn TPS switch which allows the nitrous to activate only at wide-open throttle. A direct-plug-in Fuel Line Adapter is provided to simplify installation (no need to cut your factory fuel lines). The system also includes Lightning series fuel and nitrous solenoids, two Shark nozzles, two nozzle adapters, systems with a bottle include the new lightning bottle valve, extra long stainless braided N2O line, stainless bottle brackets, master arming switch, relay, a relay harness and all necessary hardware to complete the installation. Includes jetting for 35, 70, 100, and 150HP. With additional jets, this system can produce up to 300 wheel horsepower! Fits late model Nissans and Infinitis including 350Z, and G35.

Application: 2003–2018 Nissan 350Z/370Z

Part Number:

20716-10, Nitrous Express 03-18 Nissan 350Z/370Z Dual Nozzle (35-150HP) w/10lb Bottle

20716-05, Nitrous Express 03-18 Nissan 350Z/370Z Dual Nozzle (35-150HP) w/5lb Bottle Bottle

20716-12, Nitrous Express 03-18 Nissan 350Z/370Z Dual Nozzle (35-150HP) w/Composite Bottle

20716-15, Nitrous Express 03-18 Nissan 350Z/370Z Dual Nozzle (35-150HP) w/15lb Bottle

20716-00, Nitrous Express 03-18 Nissan 350Z/370Z Dual Nozzle (35-150HP) w/o Bottle


MARCH 20, 2022

Now available at NW car part is ORACLE Lighting's Dynamic ColorSHIFT Black Edition Headlights for the 2015–2017 Ford Mustang S550! The new Mustang DYNAMIC ColorSHIFT headlights from ORACLE Lighting are complete replacement headlights that pack a TON of innovative features such as Blacked-Out Housings, Sequential FLOW Turn Signals, Demon Eyes, and Smartphone Control all in one package! Dynamic ColorSHIFT RGB+A headlights feature individually addressable LEDs which pack a ton of unique features. The Dynamic features allow the user to run multiple moving color patterns through the LEDs, creating a vivid eye-catching lighting effect. The new RGB+A (RGB+ Amber LED) SWITCHBACK line-up features Amber LEDs creating the exclusive Dynamic FLOW turn signal effect. These complete headlights feature: Dynamic Halos, Dynamic Tri-Bar DRL, and Dynamic Demon Eyes and include everything needed for installation. The only parts needed to swap over are the original HID bulbs and ballasts, making installation low-effort and high reward!

Applications: 2015–2017 Ford Mustang S550 (all models) and 2016–2020 Ford Mustang Shelby GT350/GT350R

Part Number:

8199-332, Oracle 15-17 Ford Mustang Dynamic RGB+A Pre-Assembled Headlights - Black Edition - ColorSHIFT


MARCH 20, 2022

Turn up the excitement of any 2019–2021 BMW M2 Competition with aFe Power's MACH Force-Xp Cat-Back Exhaust System. This system features a high-flow 304 stainless steel tubing and muffler, producing a mild sound. A mitered merge collector is used to decrease turbulence and increase exhaust velocity, resulting in increased horsepower, torque, and improved throttle response. Utilizing a factory-style flange and hangers, this MACH Force-Xp Cat-Back is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Additionally, this system incorporates a factory style exhaust valve which uses the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. This system comes with 3 different tip styles to customize any BMW M2 Competition as needed.


Constructed from 3 IN - 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing

Utilizes Factory Style Flange and Hangers for a Secure Fit

Includes Factory Style Exhaust Valves (Using Factory Motor, Not Included)

100% MIG-Welded for Strength and Durability

Application: 2019–2021 BMW M2 Competition

Part Number:

49-36350-B, aFe MACHForce XP Exhausts Cat-Back SS 19-21 BMW M2 Competition L6-3.0L w/Black Tips

49-36350-C, aFe MACHForce XP Exhausts Cat-Back SS 19-21 BMW M2 Competition L6-3.0L w/Carbon Fiber Tips

49-36350-P, aFe MACHForce XP Exhausts Cat-Back SS 19-21 BMW M2 Competition L6-3.0L w/Polished Tips


MARCH 21, 2022

Hawk Performance has developed LTS Brake Pads, a compound specifically designed for Light Truck & SUV duty. This compound dramatically improves the vehicle's stopping power and fade resistance and outlasts the competition in terms of rotor and pad wear. Ideal for a broad range of import and domestic vehicles, LTS provides superior stopping power and longer pad life, without excessive noise and dust. Engineered by truck brake pad experts, the Ferro-Carbon friction material of LTS is the optimal pad choice for light duty trucks, all classes of SUVs, and vans up to 1 ton. These pads provide 20-40% more stopping power over stock replacement pads!


Greater fade resistance

Strong & balanced initial bite, hot or cold

Ferro-Carbon friction

Low dust output

Low torque

100-700 F operating temperatures

100-700 F optimal temperature range


MARCH 21, 2022

Now available from McLeod Racing is their full Street Tuner Series Line of clutch kits, designed specifically for Sport Compact and European Markets. McLeod Racing recommends this line of kit be used with builds that feature 20-25% more power, or cars with mild bolt-ons that see mostly street use. Each kit features a high quality matched pressure plate and an advanced steel backed disc for smooth and even engagement. They also feature a pilot tool and throw out bearing where applicable. This kit is the perfect replacement for the factory hardware.


MARCH 22, 2022

Keep the engine running smooth with Radium Engineering's new Dual Catch Can Kit, now available for the 2016–2021 Toyota Tacoma at NWcarpart! Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. These kits mount using factory holes and integrate perfectly with the surrounding components. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modifications are required.

The PCV catch can kit runs inline between the PCV valve and the intake pipe. It mounts to threaded bosses in the engine bay on the inner fender. The PCV catch can traps unwanted "metered" crankcase vapor, unspent fuel, and oil sludge. It promotes clean filtered air back into the intake manifold. The CCV catch can mounts to threaded bosses in the engine bay on the inner fender with the provided supplementary bracket. To retain factory functionality, the CCV catch can runs inline between the crankcase vent (CCV) port and the intake pipe. At low loads, it experiences atmospheric pressure. However, when the engine is at high load (WOT), the line will experience high flow from the crankcase into the intake system. This would normally lead to oil and sludge accumulation in the air filter intake pipe. The CCV catch can captures this and promotes clean filtered air back into the intake.


Baffled catch cans with dipsticks

Tacoma specific mounting bracket

10AN adapter fittings and hose ends

Application: 2016–2021 Toyota Tacoma

Part Numbers:

20-0840, Radium Engineering 2016+ Toyota Tacoma Dual Catch Can Kit

20-0838, Radium Engineering 2016+ Toyota Tacoma PCV Catch Can Kit

20-0839, Radium Engineering 2016+ Toyota Tacoma CCV Catch Can Kit


MARCH 22, 2022

The OS Giken Super Lock LSD uses our patented pressure ring design that allows for smooth, progressive locking. This design is a spline-through-side-gear design that allows for fitment of more friction plates (up to 2x as many as competitors versions). All components are constructed from a high-grade steel alloy and chemically heat treated for maximum durability. The gears are raw-forged for maximum strength and clutch disks are precision-machined simultaneously on both sides to extremely tight tolerances resulting in minimal warpage. The OS LSD standard spec allows for low preload while still retaining a fully progressive 100% lock capability. Operation is quiet and the progressive locking allows for smooth predictable locking. When replacing an open diff, equipping an OS LSD will completely improve the driving experience while maintaining everyday drivability.

Applications: 2009–2020 Nissan 370Z Z34 (Manual Non-LSD)

Part Number:

NS112-HA, OS Giken Nissan 350Z/370Z Z33 VQ35HR/VQ37 (MT Only) Super Lock LSD


MARCH 6, 2022

Sinister Diesel’s new Cold Air Intake for the 2013–2018 Dodge Ram 6.7L Cummins Engine features build and material specs unlike other intakes on the market. For example, instead of the usual plastic tubing, Sinister uses mandrel-bent aluminum for maximum strength, airflow, and heat dissipation. Also, rather than using industry-standard rubber couplers, Sinister uses superior silicone couplers for longevity.

Filter-to-turbo connectivity is another feature that delivers top performance, along with a polished and powder-coated finish for durability and a clean look under the hood. To ensure quality control, Sinister fabricates the new intake in-house at their Sacramento, California area facility. Easy installation completes the long list of features truck owners will appreciate.


Blue powder coat for extra protection

Aluminum construction

Mandrel-bent tubing with full TIG welds and pressure tested

Elbow has 1/8-inch NPT fitting for a boost gauge

Lifetime warranty

Made in the USA

Application: 2013–2018 Dodge Ram 6.7L Cummins

Part Number:

SD-CAI-6.7C-13, Sinister Diesel 13-18 Dodge Ram 6.7L Cummins Cold Air Intake (Will Not Fit 2019+)


MARCH 8, 2022

Harnessing big power on the Nissan Skyline GT-R platforms just became a lot easier thanks to the 4000 Series Slotted Rotors, now available from DBA. DBA’s 4000 Series T3 is the ultimate in direct replacement single-piece performance brake rotor. Featuring all the benefits of the 4000 Series plus DBA’s patented world renowned T3 bi-directional slot design.

Built on the foundations of DBA’s T2 slot, the T3 slot design features additional, precise, CNC machined tri-symmetrical slots, resulting in an even quieter, more responsive and smoother brake pedal feel. The T3 slot increases the number of exit points for brake pad friction dust and gases to escape through, further increasing the consistency and effectiveness of every brake stop.

Applications: 1989–1994 Nissan Skyline GT-R R32, 1995–1998 Nissan Skyline GT-R R33, 1999–2002 Nissan Skyline GT-R R34

Part Numbers:

4928S, DBA 8/93-94 Nissan Skyline R32 GT-R/95-7/98 R33 & R34 GT-R Frt Slotted 4000 Series Rotors

MAP: $204.05

4929S, DBA 95-7/98 R33 & R34 GT-R Rear Slotted 4000 Series Rotors

MAP: $204.05

 Injen Technology's SP Cold Air Intake for 2009–2020 Nissan 370Z. The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this product to develop some serious bolt-on power with some killer horsepower increase. In addition to the impressive power increase, the Injen Technology team has ensured that safe air-fuel (A/F) ratios are maintained throughout the powerband. The soul of this intake is its mandrel-bent aluminum air intake tube that provides a smooth, uninterrupted path for highly efficient airflow and a look that will impress every time the hood is opened!

Additionally, this SP1989 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen Technology SP cold-air intake provides the power that can be heard and felt! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. This intake system is available in multiple finishes – SP1989P for a high luster polished finish or SP1989BLK for their laser black coated finish. To top it all off, this SP1989 short ram cold air intake system includes the unbeatable Injen Technology Limited Lifetime Warranty!

Application: 2009–2020 Nissan 370Z

Part Numbers:

SP1989BLK, Injen 09-20 Nissan 370Z Black Cold Air Intake

SP1989P, Injen 09-20 Nissan 370Z Polished Cold Air Intake

Intended for high horsepower street applications, the McLeod Racing RST twin disc clutch kit is an economically priced twin disc clutch kit. Able to handle 800hp, this clutch can handle almost any horsepower thrown at it and still remain street usable. Organic lined clutch discs will provide smooth engagement with a soft pedal effort to make this clutch kit ideal for the street only performance enthusiast. The McLeod Racing RXT Street Twin Clutch Kit is designed for even higher 1000hp projects that see equal track and street time. Ceramic lined clutch discs will provide smooth engagement with a soft pedal effort to make this clutch kit ideal for the street performance project. This clutch is perfect for an application that needs the best of both worlds.


MARCH 8, 2022

Engineered to 'Activate More Grip', BCK003 is a packaged solution designed to improve performance and enhance the driving experience of these vehicles. Boasting a 33mm 2 point adjustable front sway bar and 18mm 2 point adjustable rear sway bar, the kit is completed with front and rear sway bar links and mounting accessories (where applicable) that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.


Front Sway bar - 33mm 2 point adjustable

Rear Sway bar - 18mm 2 point adjustable

Internal grease reservoirs provide continual self-lubrication for optimum friction management

DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads

Application: 2008–2021 Dodge Challenger

Part Number:

BCK003, Whiteline 08-14 Dodge Challenger SRT8 Front & Rear Sway Bar Kit


MARCH 4, 2022

Skunk2 Racing Pro-ST Coilovers for 2017–2021 Honda Civic Si! Skunk2’s Pro-ST Coilover Kits are engineered to racing specifications, tested and proven over decades on winning racing teams. Integrating the highest-level technologies into an affordable street-spec coilover, these systems are a perfect, affordable solution for any daily driven performance vehicle. Built with daily driven sports cars in mind, the Pro-ST shock absorbers are shorter than factory, lowering the vehicle approximately 3-inches while still retaining full shock travel. This, coupled with the 12-way damping adjustability and stiffer springs, allows the ability to adjust to the perfect setting for the driving environment.


Lower Vehicle Stance

Progressive Track Tuning

Performance Street Comfort

Strong 52mm Seamless Carbon Steel Shock Body

Application: 2017–2021 Honda Civic Si

Part Number:

541-05-8780, Skunk2 17-20 Honda Civic Si Pro-ST Coilovers

K&N Engineering has released their new Performance Air Intake System for the 2015–2019 Chevrolet Corvette C7 Z06! A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to the engine and provides a guaranteed increase in horsepower and torque. The K&N Performance Air Intake System is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. Additionally, a custom heat shield helps protect intake air from the high temperature within the engine bay, and the entire system can typically be installed in less than 90 minutes!


Guaranteed to increase horsepower and torque

Roto-molded HDPE intake tube paired with oversized oiled cotton air filter

Engineered to provide high airflow and exceptional filtration

Replaces factory air filter and intake tube

Filter only requires cleaning every 100,000 miles under normal highway driving conditions

A typical installation can be completed in 90 minutes or less with simple hand tools

10-Year/Million Mile Limited Warranty

Will not void vehicle warranty

Application: 2015–2019 Chevrolet Corvette Z06 (C7)

Part Number:

63-3090, K&N 15-16 Chevy Corvette Z06 6.2L V8 Aircharger Performance Intake


MARCH 5, 2022

Transform the handling of any Volkswagen Golf R (MK7) into a canyon carving machine with aFe Control sway bars. With 2-way adjustability in the front and rear, you can easily dial in the handling balance and eliminate understeer. Body roll will be reduced, maximizing tire contact with the road. Shortened transition response will improve initial turn-in making the car more agile and feel lighter. Whether its stability on the track, more rotation on the autocross, or just adding confidence in the canyon, aFe Control sway bars will deliver.


CNC Bent, Lightweight 1026 DOM Steel Tubular Sway Bars

29mm (1.125”) Front Sway Bar, 2-Way Adjustment

25.4mm (1”) Rear Sway Bar, 2-Way Adjustment

CNC Machined Sway Bar Ends

6061-T6 Billet Aluminum Bushing Brackets

90A Durometer Polyurethane Bushings

Durable Blue Powder Coat

Direct Fit Installation Requires No Modifications

Made in the USA

Application: 2015–2019 Volkswagen Golf R (MK7)


FEBRUARY 28, 2022

During the process of venting crankcase pressure back through the intake track, large amounts of oil—in the form of vapors—surface within the intake tube and intake manifold runners. These vapors can even dilute fuel, lowering its octane level. This happens on all engines and is even worse with forced-induction vehicles (supercharged and turbocharged) as crankcase pressures are increased. To combat this, J&L Oil Separator Company has developed an oil separator of the company's own design. Milled from solid billet aluminum this is a rock-solid piece. It has a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks.

Filtering consists of a fine mesh stainless steel screen that traps fine oil vapors and releases them once heavy enough to fall. They then pass through a 1/2-inch thick, 1/16th-inch aluminum honeycomb filter where they grow ever larger and then fall into the bottom. By the time the oil gets through the filter, it's too heavy to be passed on into the intake. The tank holds 3 ounces of fluid, while that may not sound like a lot, there should not be that much oil in the PCV system. Draining it every 2000-3000 miles prevents it from filing up.


3 oz fluid capacity

Solid billet construction

OEM-style quick connect PCV fittings

Multi-stage filter design

Application: 2021+ Ford F150 Powerboost


FEBRUARY 24, 2022

Designed to provide maximum stance and increased driving dynamics for the already sharp chassis, ST Suspensions has offerings in the ST X and ST XA kits making for a suitable option for any project or budget. The ST X kit is a great entry level kit that was developed for the everyday driver who needs to hug the curves yet retain road comfort. This kit is fully height adjustable and drops between 0.8" and 1.8" for seamless height adjustment. The ST XA coilover kit brings the next level of tuning by providing damping adjustability. Whether the intended ride is more comfort or performance, the unique XA coilovers feature 16-way adjustable dampers to dial in the exact ride needed for any Volkswagen Golf MK8 enthusiast.


Fully height adjustable between 0.8" and 1.8" of lowering capability

Improved handling

Reduced pitch and body roll

16-way adjustable dampers on ST XA Coilovers

Application: 2022 Volkswagen Golf GTI/R (MK8)


FEBRUARY 23, 2022

Big torque doesn't have to mean big traction problems. Eaton Posi Performance differentials combine carbon friction discs with precision-forged gears to give you great traction, even under higher torque loads. Plus, the carbon friction discs produce a smooth, quiet performance for the life of your vehicle.

Part Number:

19554-010, Eaton Posi Differential 30 Spline 1.29in Axle Shaft Diameter 3.08-3.90 Ratio Rear 8.875in


MARCH 1, 2022

Stopping quickly and efficiently with the BMW M3 E46 just became a lot easier thanks to the 4000 Series Slotted Rotors, now available from DBA. DBA’s 4000 Series T3 is the ultimate in direct replacement single-piece performance brake rotor. Featuring all the benefits of the 4000 Series plus DBA’s patented world renowned T3 bi-directional slot design.

Built on the foundations of DBA’s T2 slot, the T3 slot design features additional, precise, CNC machined tri-symmetrical slots, resulting in an even quieter, more responsive and smoother brake pedal feel. The T3 slot increases the number of exit points for brake pad friction dust and gases to escape through, further increasing the consistency and effectiveness of every brake stop.

Applications: 2001–2006 BMW M3 E46


FEBRUARY 25, 2022

Stand out in any crowd with ORACLE Lighting's new Double Row LED Illuminated Wheel Rings, now available at Turn 14 Distribution! ORACLE Lighting illuminated LED wheel rings are an easy and effective way to light up the wheels on any car or truck! This head-turning lighting product consists of a set of (4) LED illuminated aluminum rings which install around the brake rotor and attaches to the brake dust shield. These can also be mounted to older vehicles with drum brakes. The effect is a large ring of light which accents custom wheels and stands out at events. Oversized 16.5” diameter is the largest on the market and fits oversized brakes. These are available in 3 colors; white, blue, and red to match any style needed.


LED Ring Diameter: 16.5”

Fits Around Brake Rotor

Can Withstand High Temperatures

Operating Voltage: 12V DC

Super Bright 2835 LEDs

Engines are meant to breathe and BD Diesel has the ultimate solution with their brand new Exhaust Manifold Set for 2011–2016 Ford 3.5L EcoBoost applications. BD Diesel recognized an inherent design flaw with the OEM exhaust manifold that has lead to premature wear, warped exhaust manifolds, broken exhaust studs, and blown manifold gaskets. These were the result of the factory manifolds using only 8 of the 11 studs locations available. BD Diesel set out to address this issue while also improving exhaust flow and durability with their Exhaust Manifold Set. These manifolds are made from thicker-walled high silicone ductile iron designed to resist thermal warping and have been port matched to the cylinder head to optimize efficiency and promote quicker turbo spool up.


Utilize 3 additional exhaust stud locations

BD Thick wall high-silicon ductile cast iron resists thermal warping

15mm longer exhaust studs + spacers

Port matched to cylinder head to optimize efficiency and promote quicker turbo spool up

Applications: 2011–2016 Ford 3.5L EcoBoost Applications

Supertech Performance uses their experience of more than 20 years in the manufacturing of racing valves to perform intensive testing. It also works very closely with many engine builders in order to continuously improve and provide the market with the best possible product for every application. High flow rates, durability, and quality are of great concern to Supertech Performance.

The black nitride coating on these valves is a hardening treatment that—even though it is not widely used as the chrome coating—has several benefits and is becoming very popular for European and Japanese applications. The microhardness is higher than the stainless steel base material, which keeps good ductility beneath the hard nitrided layer (microhardness is 800HV minimum). The surface finish is smoother than with chromed stems, having less friction between stem and guide. The valve seat surface is harder with the nitrided layer, which lasts longer with lead-free fuels, alcohols, nitro or other "explosive" mixes.

Higher RPM engines take full advantage of all previous features. The higher the engine speed the bigger the power loss due to internal engine friction! The black nitride layer reduces this power loss due to less valve-guide friction.

The nitrided layer adheres to the base material at a microscopic level, so it does not "flake" or brake when the valves bend due to impacts with the pistons. The black nitride applies to the whole valve while the chrome coating is only applied to the stem. All valves are swirl polished, have stem undercut, and a hardened tip.

Efficiency is critical in modern turbocharged engines, and Turbosmart has developed two brand new Kompact EM Series Blow-Off Valves for Ford's latest EcoBoost Trucks and SUVs. These Blow-Off Valves are an industry-first direct plug-and-play replacement for the plastic factory diverter valves. As these are direct replacements, no extra hoses, wires, or solenoids are required. Built to last just like the Bronco, these valves are made from durable billet CNC Aluminum and feature patented Integrated Pressure Control Technology. These valves are designed to produce more excellent reliability, superior boost handling, and improved response. Available in Dual Port and Plumb Back, Turbosmart has the upgrade needed for any Ford Bronco, Bronco Sport, or Maverick EcoBoost.

Applications: 2021+ Ford Bronco, 2021+ Ford Bronco Sport 2.0L, 2022+ Ford Maverick 2.0L

Our Latest Blog Entry

CSF Cooling teamed up with Bisimoto for a SEMA product that lead to this brand new stepped High Performance Intercooler for the 2019–2022 Hyundai Veloster N, now available at NW Car Part ! With technology taken from CSF’s #1 selling BMW N54/N55 intercooler, the front face of the intercooler features CSF’s exclusive rounded bar/plate design, which aids the air entering the intercooler core by curving around the front bars rather than hitting and scattering on the surface of a traditional flat-bar faced intercooler. CSF’s stepped-core design maximizes all of the available frontal area behind the front bumper and underneath the crash bar. The stepped-core protrudes upwards in front of the A.C. Condenser and sits just shy of the crash bar, for both the Veloster N and i30 N.

Through prototype testing and data acquisition with Bisimoto, the decision was made to keep the OEM-sized inlet and outlet connections. This resulted in low pressure drop, even considering how much larger the CSF intercooler is – in addition, this feature removes the need to include costly and unnecessary silicone hoses, allowing CSF to offer the N community the best value, entering the market at the most aggressive price point.


Stepped Core Design for Maximum Surface Area Contact and Internal Intake Air-Flow Volume

Largest “Drop-in Fit” Intercooler Available in the Industry

Designed with 3D Scanning/Rapid Prototype Technology to Ensure Precise Fitment and Maximum Surface Area Utilization

Lab Tested in CSF’s In-House Wind Tunnel

Integrated Air Temperature Sensor Bracket

Available in Both Black and Silver Finishes

Includes Both Bisimoto and CSF Stencils for Front Core Face Customization

Öhlins Racing dedicated track suspension systems offer race-level performance in a complete, ready-to-install package. Applications are shake-rig developed and track validated with specific spring rates (manufactured by Swift to Öhlins Racing specs), clicker settings, and ride height specifications. Öhlins Racing looks at the entire performance picture when developing dedicated tack systems, as each is engineered to perform with proven track setups for each specific chassis.

Systems utilize Dual Flow Valve (DFV) technology allowing engineers to tune force curves ideally balanced for chassis support and maintaining traction over pavement irregularities and on-track curb strikes. Spherical upper mounts included.


Dual Flow Valve Technology

Developed for Track Cars

Adjustable Damping and Ride Height

Spherical Upper Mounts

Swift springs to Öhlins Racing specs

Shake rig and track validated


Application: 2008–2013 BMW M3 (E9X)

Part Number:

BMU MU40S1, Ohlins 08-13 BMW M3 (E9X) Dedicated Track Coilover System

This axle-back exhaust system is made from corrosion resistant T304 stainless steel and high-flow, 3-inch, mandrel bent tubing. Utilizing the existing exhaust hangers and mounting locations, this exhaust system is easy to install and adds an aggressive exhaust tone when cruising down the highway or the trails. Complete with a stainless steel ROUSH muffler and a removable black-coated tip, this exhaust system is ready for action. The removable exhaust tip is etched with the R logo and allows for an even greater departure angle when going the Bronco off the beaten path.


Fits all 2.3L and 2.7L 2021 Ford Broncos

Throaty ROUSH exhaust tone

Increased turbo sound

Utilizes factory mounting locations

Doesn't hang as low as OE muffler (improved clearance and departure angle)

Removable exhaust tip for more clearance when off-roading

High-flow, less restrictive, muffler

Application: 2021+ Ford Bronco

Part Number:

422234, ROUSH 2021+ Ford Bronco 2.3/2.7L Performance Exhaust Kit

The QRT-K is a lightweight Carbon Kevlar racing seat with an exposed yellow/black Carbon Kevlar weave. The QRT-K is one of the lightest “large” size seats on the market weighing only 13.5lbs fully trimmed (with padding, cover and harness guides). It is constructed from “Pre-Preg” aerospace grade Carbon Kevlar. The QRT-K was specifically designed for a larger driver and it can fit a 36” waist (pants size) driver. The QRT-K is unique because it was designed to fit a larger driver but has excellent fitment into smaller cockpits. The QRT-K requires the special QRT Side mounts (600QRT) which allows the seat to be raked back for a comfortable ergonomic seating position. The QRT-K is FIA approved.

Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods.

Part Number:

008027ZNR, Sparco Seat QRT-K Kevlar Black

The CORSA Performance 2017+ Camaro ZL1 Carbon Fiber air intake is made from pure 100% carbon fiber construction and pairs aesthetics and engineering for maximum strength and performance. Compared to stock; the optimized shape of the CORSA Performance air intake duct, combined with high-performance filtration, increases overall performance and fuel economy. Dyno tuned for maximum results, the CORSA Performance Camaro ZL1 Carbon Fiber Air Intake produces up to an additional 19 HP and 28 LB-FT TQ from the supercharged 6.2L LT4 V8 engine without a tune. The ZL1 intake comes available in both DryTech and MaxFlow 5 oiled filtration.


100% carbon fiber construction

Double Cone Filtration

Black Powder Coated Aluminum Heat Shield

No Tune Required

Application: 2017+ Chevrolet Camaro ZL1

AutoMeter's FiTech CAN gauges are the perfect instrumentation solution for any projects that have been converted to FiTech's electronic fuel injection and/or transmission controller systems. The available tachometer, speedometer, and water temperature gauges are direct plug-n-play into FiTech's CAN output and match AutoMeter's popular Sport-Comp II Series. These gauges can be combined with any other gauges from the series to seamlessly integrate a set of high-quality AutoMeter gauges into what ever direction the project vehicle calls for.


Direct connection to CAN output on FiTech's electronic fuel injection and trans controller systems

Through the dial white LED Lighting with lit pointer

Match all existing AutoMeter Sport-Comp II gauges for seamless integration of non-CAN instruments

CAN gauges offer dimming through FiTech's control module


FEBRUARY 10, 2022

K&N Engineering washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants. They are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of a vehicle, and backed by K&N Engineering's 10-Year/Million Mile Limited Warranty. The company's drop-in replacement filters are designed to install easily into the factory air box.


Washable, reusable, and engineered to last for the life of your vehicle

Designed to provide high airflow and exceptional filtration

Engineered to fit easily into your factory air box

Emissions legal in all 50 States

Application: 2021 Ford Bronco

Part Number:

E-0634, K&N Engineering 2021 Ford Bronco Replacement Air Filter

Our Blog

An ongoing series of informational entries


FEBRUARY 9, 2022arch 15, 2022

Eibach special edition pro-kit springs are designed and crafted to retain the look, fit and finish of the factory equipment with the benefit of Eibach's legendary performance technology. By lowering the center of gravity, the PRO-KIT increases steering response and improves vehicle dynamics for a sportier, more balanced feel. Additionally, the reduced height eliminates excessive ground clearance and fender gap giving the Corvette a look it deserves.


Precision wound hi-tensile steel alloy, cold-formed, tempered and shot-peened for long lasting performance and durability

Lowers ride height up to 1.1” (varies by sub-model)

Progressive spring design for balance of sport performance and excellent ride quality

Special Edition matte black coating

Engineered and tested to work perfectly with factory electronic/standard damper systems

Application: 2020+ Chevrolet Corvette C8

Part Number:

E10-23-036-01-22, Eibach Pro-Kit for 20-21 Chevy Corvette C8 6.2L V8

412 Forged UTV Beadlock Wheel from Method Race Wheels

Method Race Wheels is pleased to introduce the ultimate UTV wheel. Featuring premium materials and the latest technologies, this UTV wheel delivers the highest levels of performance for your ride. With a lightweight construction and superior strength, the new 412 Forged UTV Beadlock wheel from Method allows you to get the most out of your UTV in even the most demanding off-road environments. With a tough multi-spoke design and hard-to-miss METHOD logos, this wheel will show others that you mean business while checking all the boxes an off-roader/UTV enthusiast could ask for.

The forged 6061 aluminum construction with T6 heat treatment offers the highest strength paired with the lowest weight for high-performance applications. Maximum tire security comes with a true V.40 Beadlock outer ring and Bead Grip bead seats on the reinforced inner lip for unmatched confidence at low tire pressures. Excess material was removed from the ring for weight savings while keeping the wheel ultra-strong, with a load rating of up to 1600 pounds. The wheel kit includes Grade 8 zinc-plated beadlock hardware for added durability.


Forged 6061 aluminum with T6 heat treatment construction

Tough multi-spoke design with debossed METHOD logos

Forged 6061 aluminum V.40 beadlock ring

Reinforced inner lip provides extreme strength and durability

Excess material removed from ring for additional weight reduction

Grade 8 zinc-plated beadlock hardware kit included

Super strong 1600-pound load rating

Patented Bead Grip® bead seats on the inner lip

15×5 weighs in at ~2lbs lighter on average than comparable 401-R high-offset wheel.

Wheel Specs:

Part Number: MR41255047343B

Wheel Diameter: 15 in.

Wheel Width: 5.0 in.

Bolt Pattern: 4×136

Offset: 43mm

Hub Bore: 100.00 mm

Backside Spacing: 4.70 in.

Wheel Weight: 15.4 lbs

Max Load: 1600 lbs


FEBRUARY 9, 2022

The Eaton ELocker4 is an electronic, selectable differential designed for drivers that need traction on-demand. At the flip of a switch, drivers can go from open to 100-percent locked and back again. The 4 pinion gear design provides added strength and capability for more extreme vehicles and features the fastest engagement (.14 seconds).


For use with 30 spline axles

3.73 and down gear ratios

8.5-inch ring gear

Electric activation

Switches from open to full spool

Fastest engagement (.14 seconds)

1.31-inch axle shaft diameter

Part Number:

19977-010, Eaton ELocker4 Differential Dana 44 Front 30 Spline 3.73 & Down Ratio

bottom of page